LiFePO4 12V/12.8V 100Ah LiFePO4 Battery with BlueTooth and Heating Function
SKU: GV12100T31
- Nominal Voltage: 12.8V
- Nominal Capacity: 100Ah/1280Wh
- Voltage Range: 10V~14.6V
- Max. Continuous Discharge Current: 100A
- Discharge Surge Current1: 120A for 60 seconds
- Discharge Surge current2: 200A for 5 seconds
- Surge for Loads Over: 500A for 2 Seconds
- Communication Protocol: CANBus, MODBus- RS485/232, UART.
- Battery Function: Heating Function and BlueTooth Function.
- Dimension: 12.99″L X 6.81″W X 9.45″H
- Case Material: Stainless Steel
- Weight: 28.66 lbs.
LiFePO4 12V/12.8V 100Ah LiFePO4 Battery with BlueTooth and Heating Function.
12.8V 100Ah LiFePO4 Battery | LiFePO4 Technology | Long-Lasting Power & Fast Charging
Product Overview
The GreatVolt 12.8 V 100 Ah LiFePO₄ Battery (GV12100T31) is a heavy-duty, iron-cased drop-in replacement for 12 V lead-acid banks, now with integrated CANbus, RS-485, UART communications, Bluetooth monitoring, and an on-board heating element. Engineered for extreme environments—from sub-zero winters in your RV to salt-spray decks on your yacht—this battery delivers clean, reliable power for RVs, marine vessels, and solar/off-grid systems.
Key Features
-
Industrial-Grade Iron Enclosure
Rugged cold-rolled steel housing with IP67 sealing for vibration and water-resistance. -
Multi-Protocol Communications
Native CANbus, RS-485, and UART ports allow seamless integration with vehicle or solar controllers. -
Bluetooth Smart Monitoring
Real-time read-outs of voltage, state-of-charge, cell temperature, and cycle count. -
Auto-Heating Function
Automatic heater activation below 0 °C, enabling safe charging down to 0 °C. -
Extended Cycle Life
≥ 3,000 cycles at 80 % DoD—translating to 7–10 years of typical use. -
High Discharge Capability
100 A continuous (1 C) and 200 A peak (2 C for 5 s) for heavy-load starts and onboard systems. -
Advanced BMS Protection
Over-charge, over-discharge, over-current, short-circuit, and over-temperature safeguards built in. -
Lightweight Efficiency
At just 12 kg, over 60 % lighter than equivalent lead-acid banks, improving fuel economy and handling.
Applications
-
RVs & Camper Vans
Ideal for running lighting, water pumps, HVAC, and entertainment systems—year-round, even in cold climates. -
Marine & Yachts
Perfect for trolling motors, navigation electronics, deck lighting, and auxiliary power on fishing boats and yachts. -
Solar & Off-Grid
Build scalable banks (series/parallel) for cabins, tiny homes, and remote solar installations with full system communications.
Installation & Use
-
Drop-In Footprint
Fits standard 12 V lead-acid trays and mounting brackets—no custom fabrication required. -
Plug-Ready Terminals
M8 stainless studs for power, plus dedicated RJ45 and screw-terminal ports for CAN, RS-485, and UART. -
Series & Parallel Configurations
Safely wire up to 4× batteries in series (25.6 V, 38.4 V, 51.2 V) or parallel (up to 400 Ah) with on-board BMS balancing. -
First-Time Setup
Arrives at ~50 % SOC—top off with a LiFePO₄ charger (14.6 V float). Activate Bluetooth monitoring and verify comms link to your control system. -
Hassle-Free Operation
No watering or equalizing needed. Periodic terminal checks for torque and corrosion are all that’s required.
Why Choose GreatVolt Battery?
-
Enterprise-Level Control: Full CANbus/RS-485/UART for professional fleets and solar arrays.
-
Cold-Climate Ready: Built-in heating ensures safe charging even in freezing temperatures.
-
Data-Driven Peace of Mind: Wireless Bluetooth diagnostics plus industrial comms keep you informed and in charge.
-
Industrial Durability: Iron housing and IP65 rating stand up to vibration, moisture, and corrosive marine air.
-
Long-Term Value: 2,000+ cycles and zero-maintenance chemistry slash total cost of ownership.
Purchase & Support
Equip your RV, boat, or off-grid system with the GreatVolt 12.8 V 100 Ah GV12100T31—the smartest, toughest 12 V LiFePO₄ in its class. Add to Cart now and experience true industrial-grade battery performance!
FAQ
-
Visually inspect the iron enclosure and terminals for any shipping damage.
-
Fully charge using a LiFePO₄ charger set to 14.6 V float before first use.
-
Power on Bluetooth monitoring and verify your communications link (CANbus/RS-485/UART) to your controller.
-
CANbus, RS-485, and UART ports are built in.
-
Simply wire the corresponding RJ45 (CAN) or screw-terminal (RS-485/UART) ports to your BMS master, solar inverter, or vehicle ECU—no external module required.
-
Wireless monitoring of voltage, state-of-charge, cell temperatures, cycle count, and fault alerts.
-
On-demand access to real-time diagnostics, historical cycle data, and firmware updates via the GreatVolt app.
-
An internal heater engages automatically when cell temperature falls below 5 °C.
-
This warms the cells so that safe charging down to 0 °C is possible—no manual switch needed.
-
Discharge: –20 °C to +70 °C
-
Charge: 0 °C to +50 °C (heating active below 0 °C)
-
Ingress Protection: IP65–rated iron housing withstands vibration, salt spray, and moisture.
-
Series: Up to 4× in series for higher-voltage systems (25.6 V, 38.4 V, 51.2 V).
-
Parallel: Up to 4× in parallel to boost capacity (up to 400 Ah).
-
Always use identical age, capacity, and SOC batteries and rely on the on-board BMS for active balancing.
-
None. LiFePO₄ chemistry is maintenance-free—no watering or equalizing.
-
Simply check terminal torque and clean any surface corrosion annually.
Cycle Life: ≥ 2,000 cycles at 80 % DoD (equivalent to 7–10 years of typical use).
You might also like
US$550.00 – US$2,156.00Price range: US$550.00 through US$2,156.00
US$679.00 – US$2,664.00Price range: US$679.00 through US$2,664.00
US$849.00 – US$3,344.00Price range: US$849.00 through US$3,344.00
Reviews
There are no reviews yet.